Single-Molecule Sensing of Acidic Catecholamine Metabolites Using a Programmable Nanopore

Acidic catecholamine metabolites, which could serve as diagnostic markers for many diseases, demonstrate an importance of accurate sensing. However, they share a highly similar chemical structure, which is a challenge in the design of sensing strategies. A nanopore may be engineered to sense these metabolites in a single molecule manner. To achieve this, a recently developed programmable nano-reactor for stochastic sensing (PNRSS) technique adapted with a phenylboronic acid (PBA) adaptor was applied. Three acidic catecholamine metabolites, including 3,4-dihydroxyphenylacetic acid (DOPAC), 3,4-dihydroxymandelic acid (DHMA) and 3-methoxy-4-hydroxymandetic acid (VMA) were investigated by PNRSS. Specifically, DHMA, which contains an α-hydroxycarboxylate moiety and an adjacent cis-hydroxyl groups on its benzene ring, reports two binding modes simultaneously resolvable by PNRSS. Assisted with the high resolution of PNRSS, direct regulation of these two binding modes by pH can also be observed. A custom machine learning algorithm was also developed to achieve automatic event classification.     

Optimal time delays in a class of reaction-diffusion equations

ABSTRACT

A class of semilinear parabolic reaction diffusion equations with multiple time delays is considered. These time delays and corresponding weights are to be optimized such that the associated solution of the delay equation is the best approximation of a desired state function. The differentiability of the mapping is proved that associates the solution of the delay equation to the vector of weights and delays. Based on an adjoint calculus, first-order necessary optimality conditions are derived. Numerical test examples show the applicability of the concept of optimizing time delays.     

基于SVM的固化土无侧限抗压强度模型

为实现较少试验次数下固化土无侧限抗压强度(qu)的准确预测, 提出了基于支持向量机(SVM)的固化土qu的预测模型. 以固化剂各组分掺入比、龄期、初始含水量、固化剂掺量等因素为输入量, 固化土的qu作为输出量, 以径向基为核函数, 采用网格搜索法和交叉验证法进行参数优化, 建立了基于SVM的固化土qu的预测模型. 算例分析表明: 该模型适用于任意条件下固化土qu的精确预测, 且在较小试验成本下实现与响应面法相当的预测精度.     

PSO-LSSVM对LIBS定量分析精度的提高

针对土壤定量分析受基体效应影响大，LIBS定量分析精度不佳等问题，采用粒子群算法对LSSVM进行优化，提高模型的精确度。选取Pb Ⅰ 405.78 nm和Cr Ⅰ 425.44 nm作为分析谱线进行分析。采集十二个不同浓度样品的特征光谱，每个浓度样品在不同点采集20组数据，将其中17组数据设为训练集，3组数据设为预测集，用LSSVM和PSO-LSSVM两种方法建立定标模型。对比两种模型的拟合相关系数（R2）、训练集均方根误差（RMSEC）和预测集均方根误差(RMSEP)。由于自吸收效应的影响，随着浓度的增加，预测值逐渐低于实际值，LSSVM定标模型的拟合程度较低，无法达到实验要求，模型性能有待提高。利用粒子群算法对LSSVM的模型参数惩罚系数和核函数参数进行优化，得到最佳的参数组合，Pb元素为(8 096.8, 138.865 7)，Cr元素为(4 908.6, 393.563 5)，用最佳的参数组合构建LSSVM的定标模型。相比于LSSVM，PSO-LSSVM定标模型的精确度更高，Pb和Cr元素的R2提高到了0.982 8和0.985 0，拟合效果明显提升。Pb和Cr元素的训练集均方根误差由0.026 0 Wt%和0.027 2 Wt%下降到0.022 4 Wt%和0.019 1 Wt%，预测集均方根误差由0.101 8 Wt%和0.078 8 Wt% 下降到0.045 8 Wt%和0.042 0 Wt%，模型的稳定性进一步提高。说明PSO-LSSVM算法能够更好地降低土壤基体效应和自吸收效应带来的影响，提高分析结果的精确度与稳定性。     

关于极限理论的学习经验

分析极限理论在数学分析学习中的重要性，介绍学习极限理论的三点经验与体会，即充分理解基本内容；加强基本功训练；试着多问自己一些问题，学会举出各种各样的例子。     

On weighting two criteria with a parameter in combinatorial optimization problems

Two criteria in a combinatorial problem are often combined in a weighted sum objective using a weighting parameter between 0 and 1. For special problem types, e.g., when one of the criteria is a bottleneck value, efficient algorithms are known that solve for a given value of the weighting parameter.     

缆机起重作业驾驶员的操作行为可靠性研究

缆机是大坝浇筑过程中的主要运输设备之一,缆机驾驶员操作水平直接关系缆机起重作业安全.为有效提高缆机起重作业驾驶员操作行为可靠性,预防起重作业安全事故,针对缆机起重作业周期性多维运动的特点,分解驾驶员操作流程;剖析操作行为失误,建立驾驶员行为模式;从时间角度量化操作流程,计算缆机驾驶员操作行为响应失误概率;构建操作行为可靠性分析模型,定量表达操作行为可靠性,分析人因失误对缆机起重作业安全事故的影响.结果表明,吊具与吊罐对接、混凝土卸料等作业过程的缆机驾驶员操作行为可靠性低,需加强安全培训,严格考核制度,从根本上提高缆机驾驶员操作行为的可靠性,以期提升缆机生产效率,实现预防安全事故的目标.     

几种吊钩中的力学问题探析

对吊装机械中使用的几种吊钩在吊装重物时的受力情况进行分析和比较,说明了各自的特点及其应用.     

An improved ensemble learning machine for biological activity prediction of tyrosine kinase inhibitors

Boosting is one of the most important strategies in ensemble learning because of its ability to improve the stability and performance of weak learners. It is nonparametric, multivariate, fast and interpretable but is not robust against outliers. To enhance its prediction accuracy as well as immunize it against outliers, a modified version of a boosting algorithm (AdaBoost R2) was developed and called AdaBoost R3. In the sampling step, extremum samples were added to the boosting set. In the robustness step, a modified Huber loss function was applied to overcome the outlier problem. In the output step, a deterministic threshold was used to guarantee that bad predictions do not participate in the final output. The performance of the modified algorithm was investigated with two anticancer data sets of tyrosine kinase inhibitors, and the mechanism of inhibition was studied using the relative weighted variable importance procedure. Investigating the effect of base learner's strength reveals that boosting is only successful using the classification and regression tree method (a weak to moderate learner) and does not have a significant effect using the radial basis functions partial least square method (a strong base learners). Copyright © 2015 John Wiley & Sons, Ltd.